Forum

You must be logged in to post Login Register

Search Forums:


 






Centering pic on screen after Color wheel replacement

UserPost

8:55 am
18 February 2009


litch

New Member

posts 1

Well thankxthankx to this wonderful website I was able to change the color wheel in my SamsungSamsung HLM507W

TV and everything is fine after a 2 hour operation. When I put it all back together and turned it back on,

there is a 2″ black line at the 'bottom' of the screen.  I tried giving a little tug on the projector lens after sliding the

whole thing back out and in again. I read that someone had a similar problem and stated hey did some tweaking

to center their picture again as they had a half inch line on one 'side' of their TV.   So my question is what is my

problem and specifically what needs to be tweaked.   The slide out tray seems quite ridged in where it slides in out

out and the lens is very secure in it's mounting.    A little help please, thankx…………..litch

5:05 pm
19 March 2009


Albert

New Member

posts 2

I have the same situation/problem.  My picture seems to be to be to high on the screen, the top of the picture gets cut off.  Did you have any luck in resolving the problem?  Samsung was no help in providing any possible solutions.


About the Jangro.com forum

Most Users Ever Online:

18


Currently Online:

2 Guests

Forum Stats:

Groups: 2

Forums: 4

Topics: 63

Posts: 127

Membership:

There are 3198 Members

There has been 1 Guest

There is 1 Admin

There are 0 Moderators

Top Posters:

jay2009 – 14

Vlad – 11

mtspaces – 5

ARGold – 4

roger – 3

dfwhome – 3

Administrators: Scott Jangro (36 Posts)




blog comments powered by Disqus